YardSolver app iconYardSolver is now an app —Get it on Google Play· iPhone app coming soon
YardSolver
Know what you need. Buy exactly that.

Garden Mix Calculator

Guides · Calculators · Mix sprays and feeds exactly

1 · Enter the label rate2 · See the exact mix3 · Print the list

Mixing a garden spray or feed is guesswork for most people — too weak and it does nothing, too strong and it burns the leaves. This calculator ends the guessing: enter the dose from your own product's label and your tank size, and it tells you exactly how much product and water to mix.

Your mix

Your label always wins

The prefilled numbers are typical label rates to get you started. Products differ — the dose printed on your own product's label is the law, and it overrides anything on this page. If your label gives a range, start at the weaker end. Spray on a calm, dry morning or evening, keep spray off open flowers (bees at work), wear the protection your label asks for, and keep children and pets off treated plants until the spray has dried, as the label directs. Mix only what you will use — leftover mix does not keep.

How to use this calculator

  1. Read your product's label and find its dose — for example "5 ml per litre" or "2 tablespoons per gallon".
  2. Pick the closest product above, then correct the dose number to match your label exactly. Set the tank size you actually own.
  3. Press Calculate — you get the product amount per tank and in total, plus the water.
  4. Mix in this order: half-fill the tank with water, add the measured product, top up to the full mark, and shake gently. Print the list and take it to the plant.

How the maths works: product per tank = label dose per litre × your tank size in litres; totals multiply by the number of tanks. Amounts are also shown in teaspoons/tablespoons for small mixes, because nobody owns a 5 ml measuring jug.

What are you using this for?

Tell us what you are treating, and we will help you do it yourself. Type the problem below — for example “powdery mildew on my zucchini” — and we will show you the full method, step by step, using the mix you just made.

A worked example

Neem oil at a label dose of 5 ml per litre, in a 5 litre sprayer, one tank: product per tank = 5 × 5 = 25 ml (about 5 teaspoons), water = 5 litres. Two tanks for a big bed: 50 ml of neem and 10 litres of water in total. Change the dose to your label's number and the answer follows it.

Keep going

Found the problem in a guide? Start there, then mix here: Garden Guides · Fertilizer Calculator · All Calculators · Plant Library

Questions, answered

Can I mix two products in one tank?

Only if both labels say tank-mixing is allowed, and even then mix a small test batch first. When in doubt, apply products separately on different days.

Can I keep leftover spray for next week?

No. Mixed sprays lose strength and can turn unsafe. Mix only what you will use today, and rinse the sprayer afterwards.

My label gives the dose in tablespoons per gallon. What do I enter?

One tablespoon is about 15 ml (or about 15 g for most powders). Enter 15 as the dose, choose "per gallon", and the calculator converts everything for your tank.

When is the best time to spray?

A calm, dry morning or evening — never in hot midday sun (leaf burn), never in wind (drift), and never onto open flowers while bees are working.