Deck Calculator
Deck boards run one way and joists cross under them — count both wrong and the lumber yard trip doubles. This calculator gives you boards, the stock length to buy, joists at 16 in on centre, and a screw count.
Boards are counted with a ¼ in gap between them, and joists are spaced 16 in on centre — the standard for 2× decking. This is a framing estimate: beams, posts, footings, railing and stairs depend on your design and local code.
How to use this calculator
- Type the deck length the way the boards will run, then the width they must cover.
- Pick your board — 2×6 decking is the common choice.
- Read the answer: boards and the stock length to buy, joists, and screws.
- Print the list and add beams, posts and railing from your own plan.
How the maths works: each board covers its width plus a ¼ in gap, so boards = deck width in inches ÷ (board width + 0.25), rounded up. Board length rounds up to the next stock length (8, 10, 12, 14 or 16 ft). Joists at 16 in on centre = one every 16 inches along the deck length, plus one. Screws ≈ 2 per board at every joist crossing.
What are you using this for?
Tell us what you are making, and we will help you do it yourself. Type your project below — for example “a 16 by 12 back deck” — and we will show you the full method, step by step, using the estimate you just made.
A worked example
A 16 ft × 12 ft deck with 2×6 boards: the 12 ft width is 144 inches, and each board covers 5.5 + 0.25 = 5.75 inches, so 144 ÷ 5.75 → 26 boards, bought as 16 ft stock. Joists at 16 in on centre: 13 joists of 12 ft. Screws: 26 boards × 13 joists × 2 = about 676 screws.
Keep going
Footings and pads by volume? The Concrete Slab Calculator. Pricing lumber by volume instead? The Board Foot Calculator. Fencing the yard to match? The Fence Calculator.
Questions people ask
How far apart should deck joists be?
16 inches on centre is the standard for 2× wood decking. Thinner 5/4 deck boards and most composite boards want 12 inches on centre — check the board maker's spec.
What gap should I leave between deck boards?
About ¼ inch. It drains rain, lets the boards expand, and drops out most of the crumbs and leaves that would otherwise rot in the joints.
Which board length should I buy?
The shortest stock length that covers your deck's length in one piece — butt joints mid-deck are weak points and they show. Stock lengths run 8, 10, 12, 14 and 16 ft.
How many screws does a deck take?
Two screws per board at every joist it crosses. A 16 × 12 deck with 2×6 boards works out near 676 — buy screws by the 5 lb box and round up.
Are the costs exact?
No — typical store-price ranges for your country. This is an estimate — prices can go up or down.